What items should the air compressor check

Most of the air compressor is put into use almost 24 hours operation, in addition to the necessary inspection and maintenance, this article to introduce the air compressor need to check what items:

Most of the air compressor is put into use almost 24 hours operation, in addition to the necessary inspection and maintenance, this article to introduce the air compressor need to check what items:

1. Whether the machine can operate normally;
2. Inspection for ventilation and heat dissipation of machine room;
3. Air compressor running noise inspection;
4. Air compressor condensate drainage inspection;
5. Drainage inspection for cold dryer;
6. Inspection for drainage of gas storage drum;
7. Precision filter drainage inspection;
8. Whether there is air leakage in the air compressor;
9. Whether the air compressor has oil leakage;
10 Air filter inspection;
11. Control system inspection;
12. Inspection of pressure switch and pressure regulating valve;
13. Check the operation condition of thermo-sensitive valve;
14. Inspection for heat dissipation of radiator;
15. Oily;
16. Oil quality;
17. Drive belt or coupling inspection.
18. Check the oil return system
19. Minimum pressure/check check
20. Electrical System Inspection
21. Machine outlet pressure
22. Machine outlet temperature
23. Rotor outlet pressure
24. Rotor outlet temperature
25. Operating hours
26. Load operating hours
27. Pressure difference of oil and gas separator
28. Ambient temperature
29. Motor core temperature
30. Cooling water outlet temperature
31. Cooling water inlet temperature
32. Cooling water pressure
33. Current Voltage
34. Motor running current

Other News

Operation specification for screw air compressor

Matters needing attention before starting the 1. screw air compressor:

View Details

Simple and easy to understand screw air compressor oil leakage fault judgment and troubleshooting method

After the screw air compressor is installed and debugged, the general factory runs almost 24 hours a day except for maintenance. At this time, if the air compressor is of poor quality or fails due to improper operation, it will make people feel upset, which will not only increase the use cost, but also affect the production process. In this article, Emerdy Xiaobian will introduce how to judge and eliminate the oil leakage failure of the screw air compressor.

View Details

Inspection and Maintenance Method of Screw Air Compressor after Crack

Kerosene penetration method: the inspection process is to wipe the body and cylinder head with cotton yarn head soaked with kerosene first, then wipe the places where cracks may occur with dry cotton yarn head and kerosene, and immediately put white powder on the map of these places. at this time, where there are cracks, kerosene will penetrate into the white powder, and the location and length of the cracks will be clearly displayed.

View Details

< 1234 >

Online consultation

Please fill in the correct contact information, so that we can contact you as soon as possible, with (*) is required!

Submission
%{tishi_zhanwei}%